Color Steel Integrated Flat Panel Solar Water Heater
Features description
Flat Plate Solar Collector:
1) Copper core and pipes in flat plate as heat exchanger, with a quick startup and super efficiency.
2) Three high-tech methods of coating (Selective coating / Black chrome / Titanium-Nitride-Oxide) to meet your upper needs
3) Ultrasonic technology ensures seamless jointing of copper core and pipes
4) Modularized collector, arbitrary combination with architectural structure, adaptable to either slope or flat roof, little maintenance needed
Pressurized Water Tank
1) Inner water tank: Food-grade stainless steel SUS304-2B as inner tank keeps the water clean and drinkable, automatic argon-arc welding technics ensures long lifespan (15 years) with good pressure bearing.
2) Water tank shell: Color steel plate much durable and appealing. Stainless steel shell makes it a choice for higher requirements.
3) Insulation Layer: Germany-imported polyurethane integrated foam-forming with twice slaking treatment, preserves hot water constantly
4) Pressurized water tank with super hydraulic bearing pressure makes your life more comfortable
5) Copper coil could be installed inside water tank for twice hear exchange efficiently, one more copper coil installed could be connected with radiator or other devices for house heating or connected with other heating devices such as gas to assist solar water heating.
Optional Device:
1.Electrical heater, an electricity based heating device installed in storage tank to assist solar water heating in cloudy or rainy days.
2.Intelligent controller, a device with sensor and valve for automatic water refill and temperature display, if necessary control electric heater.
3.Anode magnesium: A device installed in hot storage tank to effectively prevent solar system from generating water scale.
Warranty: Three-year international responsibility for integrated system and 15 years for vacuum tubes due to original quality problems
Working Theory:
1.INLIGHT pressure flat panel solar water heater is a kind of open-loop thermosiphon system, a thermosiphon solar system relies on warm water rising, a phenomenon known as natural convection, to circulate water through the flat panel and to the tank.
2.In this type of installation, the tank must be installed above the solar collector, as water in the panel heats, it becomes lighter and rises naturally into the tank above, meanwhile, cooler water in the tank flows down into the flat panel collector, causing circulation throughout the system.
3.The tank and flat panel are both pressurized so we share hot water with same pressure as inlet water.
Advantages:
1. INLIGHT pressure flat panel solar water heater is much more convenient for pressure hot water use from the storage tank;
2. INLIGHT flat panel solar water heater has a very simple structure and it is very easy in installation and connecting with water pipelines;
3. The water storage tank of INLIGHT flat-plate solar water heater is made of food-grade stainless steel with advanced argon arc welding ensures no leakage and rusty, The insulation layer is made of high-density integrated polyurethane foam-forming with twice slaking treatment, ensures as long as 72~80 hours heat preservation
5. Aluminum alloy frame is adaptable to both flat and slope roof installation, it is designed for 140 km/hr wind load with no rusty problem;
6. Each set of INLIGHT solar water heater and its accessories are checked and selected carefully before packing and delivery;
7. According to different requirements and conditions, INLIGHT flat-plate solar water heater can be equipped with different optional devices for automatic and intelligent system operation.
Flat Plate
Solar Collector |
Spec. (mm) |
2000*1060*70 2000*1060*80 |
| Cover Glass |
Tempered/ Tempered woven / tempered low-iron woven glass |
| Coating |
Selective / Black Chrome |
| Core |
All red copper core & pipes |
| Insulation |
Glass wool + benzene plate/ Glass wool + polyurethane foam |
| Water tank |
Capacity |
100L/ 120L/ 150L/ 200L/ 250L/ 300L/ 400L/ 500L |
| Inner tank |
Food-grade stainless steel SUS304-2B |
| Copper coil |
All red copper Φ 12 X 1.0mm |
| Insulation |
Imported polyurethane integrated foam-forming 50mm |
| Tank shell |
Color steel plate / Stainless steel |
| Bracket |
Spec. (mm) |
1.2 ~ 1.5mm in thickness |
| Material |
Hot-dip galvanized steel / Stainless steel / Aluminium alloy |
| Accessories |
Workstation, Electrical heater, Magnesium rods, T& P valve |
| Pressure |
7 bar |
| Tilt angle |
0° ~ 90° |
| Water output |
45~95 o C |
){kind=link}
){kind=link}