Heat Pipe Solar Collector, super heating efficiency and antifreezing, especially for split water heater or pressurized project.
Heat Pipe Solar Collector
Product Description
The heat pipe solar collector consists of heat pipe vacuum tube, manifold, suppoting bracket and other accessories
1) Solar heat pipe and inner midium for thermal conduction, with a quick start and super daily efficiency about 55% in summer and 42% in winter.
2) No water to go through glass vacuum tubes, no freeze to break vacuum tubes, able to serve in extremely cold winter
3) Heat pipe tip is inserted into a closed cannula welded into the copper flow passage, system works well even with withdrawal of one or several heat pipe vacuum tubes
4) Aluminum alloy as bracket with super performance in every aspect, universal bracket suitable for slope and flat roof installation
5) Modularized collector, arbitrary combination with architectural structure, adaptable to either slope roof or flat ground or upright wall, Maintenance free collector.
Product Parameters
Heat Pipe
Vacuum Tube |
Spec.(mm) |
Φ47×1500 Φ58×1800 |
| Tube (pcs) |
14 / 16 / 18 / 20 / 24 / 28 / 30 / 36 |
| Material |
Borosilicate glass, red copper heat pipe tube, aluminum fin |
| Coating |
Three-target Cu/SS-ALN(H)/SS-ALN(L)/ALN coating |
| Water tank |
Capacity |
100 ~ 300L for inner tank |
| Inner tank |
Food-grade SUS304-2B stainless steel 1.2~1.5mm |
| Insulation |
High-density polyurethane integrated-foaming 50mm |
| Tank shell |
Color steel plate ( silver PVDF plate is available) |
| Bracket |
Spec. (mm) |
1.2mm in thickness |
| Material |
Hot-dip galvanized steel / aluminum alloy |
| Accessories |
Stainless bolt, Dustproof rubber seal, Plastic pipe holder |
| Optional device |
Electrical heater , Intelligent controller, Anod magnesium bar, T&P valve |
| Working pressure |
6 bar |
| Tilt angle |
25°~ 50° |
| Water output |
45-95 o C |
| Hail resistance |
Φ25mm diameter |
Audited Supplier 
){kind=link}