Solar Water Heater Features :
1) Copper heat pipe tube and inner medium for thermal transmission, with a quick startup and super efficiency
2) No water flows into vacuum tubes, system works well with withdrawal of one or several heat pipe vacuum tubes
3) Super efficiency of insulation with polyurethane foam; No vent with less heat loss as compared to nonpressurized type
4) System withstands pressure more than 6 Bar, can be connected directly with tap water, more safe system and comfortable hot water use.
5) System can be equipped with auxiliary electric booster and intelligent controller for solar heating assistance and automatically system control
6) Simple structure, easy for assembly and installation on different structure
7) Can be used all year round even works well in extremely cold climate
8) Long lifespan, can be of good service more than 30 years
Solar water heater description
1.Heat Pipe Vacuum Tube: Three-target galss tube, aluminum fin and heat pipe with its inner medium together makes an efficient solar collecting device for heat exchange, efficiency generated about 55% in summer and 42% in winter more than that of all-glass vacuum tube.
2.Inner water tank: Thickened food-grade SUS304-2B stainless steel as storage tank keeps the water clean and drinkable, advanced automatic argon-arc welding technics ensures a very long lifespan (more than 30 years)
3.Water tank shell: Stainless steel SUS304 as outer shell, much more durable and appealing with super mechanical performance, and survives several decades to ocean coast envirionment.
4.Insulation Layer: High-density polyurethane integrated foam-forming with twice slaking treatment
5.Supporting Bracket: Stainless steel or aluminum alloy plate, super weight bearing and wind resistance design (140 km/hr), super mechanical performance and corrosion resistance ensures a long life to acid rain. Easy installation, universal bracket suitable for either flat and slope roof installation
6.Accessories: Safety valve and relief valve, Stainless bolts & nuts, anti-aging dustproof rubber seal, plastic pipe holder to ensure their lives as long as other parts of the system
Optional Devices:
1.Electrical heater, as an auxiliary heating element in case of raining or cloudy days so as to ensure a continous hot water supply
2.Intelligent controller, automatically controls startup and ceasing of auxiliary heating device with temperature sensor, more intelligent operation
3.Anod magnesium bar: Soften hard water in system so as to protect the storage tank from water scale
Warranty:
3 years international responsibility for integrated system exchange and 15 years for vacuum tube compensation due to original quality problems
Heat Pipe
Vacuum Tube |
Spec. (mm) |
Φ 47× 1500 Φ 58× 1800 |
| Tube (pcs) |
14 / 16 / 18 / 20 / 24 / 28 / 30 / 36 |
| Material |
Borosilicate glass, red copper heat pipe tube, aluminum fin |
| Coating |
Three-target Cu/SS-ALN(H)/SS-ALN(L)/ALN coating |
| Water tank |
Capacity |
100 ~ 300L for inner tank |
| Inner tank |
Food-grade SUS304-2B stainless steel 1.2~1.5mm |
| Insulation |
High-density polyurethane integrated-foaming 50mm |
| Tank shell |
Stainless steel plate SUS304 |
| Bracket |
Spec. (mm) |
1.2mm in thickness |
| Material |
Stainless steel plate (aluminum alloy bracket is available) |
| Accessories |
Stainless bolt, Dustproof rubber seal, Plastic pipe holder |
| Optional device |
Electrical heater, Intelligent controller, Anod magnesium bar, T& P valve |
| Working pressure |
6 bar |
| Tilt angle |
25° ~ 50° |
| Water output |
45-95 o C |
| Hail resistance |
Φ 25mm diameter |
){kind=link}
){kind=link}