Stainless steel compact heat pipe solar water heater
1. OEM available
2. Intelligent operation
3. High efficiency
4. It works even freezing -36
Solar Water Heater
Product Description
Features description:
1) Copper heat pipe tube and inner medium for thermal transmission, with a quick startup and super efficiency
2) No water flows into vacuum tubes, system works well with withdrawal of one or several heat pipe vacuum tubes
3) Super efficiency of insulation with polyurethane foam; No vent with less heat loss as compared to nonpressurized type
4) System withstands pressure more than 6 Bar, can be connected directly with tap water, more safe system and comfortable hot water use.
5) System can be equipped with auxiliary electric booster and intelligent controller for solar heating assistance and automatically system control
6) Simple structure, easy for assembly and installation on different structure
7) Can be used all year round even works well in extremely cold climate
8) Long lifespan, can be of good service more than 30 years
Heat Pipe Vacuum Tube: Three-target galss tube, aluminum fin and heat pipe with its inner medium together makes an efficient solar collecting device for heat exchange, efficiency generated about 55% in summer and 42% in winter more than that of all-glass vacuum tube.
Inner water tank: Thickened food-grade SUS304-2B stainless steel as storage tank keeps the water clean and drinkable, advanced automatic argon-arc welding technics ensures a very long lifespan (more than 30 years)
Water tank shell: Stainless steel SUS304 as outer shell, much more durable and appealing with super mechanical performance, and survives several decades to ocean coast envirionment.
Insulation Layer: High-density polyurethane integrated foam-forming with twice slaking treatment
Supporting Bracket: Stainless steel or aluminum alloy plate, super weight bearing and wind resistance design (140 km/hr), super mechanical performance and corrosion resistance ensures a long life to acid rain. Easy installation, universal bracket suitable for either flat and slope roof installation
Accessories: Safety valve and relief valve, Stainless bolts & nuts, anti-aging dustproof rubber seal, plastic pipe holder to ensure their lives as long as other parts of the system
Optional Devices:
Electrical heater, as an auxiliary heating element in case of raining or cloudy days so as to ensure a continous hot water supply
Intelligent controller, automatically controls startup and ceasing of auxiliary heating device with temperature sensor, more intelligent operation
Anod magnesium bar: Soften hard water in system so as to protect the storage tank from water scale
Warranty:
3 years international responsibility for integrated system exchange and 15 years for vacuum tube compensation due to original quality problems
Solar heater working principle
1.The solar heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot
3.No water in the heat pipe makes the whole system could bear pressure
Product Parameters
| Description |
pressure solar water heaters |
| Material of out tank |
0.4mm thickness color steel/ fluorine carbon steel |
| Material of inner tank |
Food grade1.5mm thickness SUS304 stainless steel |
| Tank insulating layer |
55mm 45kg/m³ high-density polyurethane foamed |
| Max pressure |
0.6 Mpa |
| Inlet and outlet hole |
Male G 1/2,3/4 |
| Solar collector tube |
3.3 Borosilicate glass with N/Al coating |
| Thickness of glass tube |
1.6mm |
| Vacuum tube tightness |
P≤0.005 Pa |
| Absorption |
as=0.93-0.96 (AM1.5) |
| Emission ratio |
εh=0.04-0.06 (80C±5C) |
| Idle sunning property parameters |
Y=220~260m2.C/KW |
| Average heat loss coefficient |
ULT=0.6~0.7W/(m2.C) |
| Bracket: |
1.5mm thickness Galvanized Steel |
| Structure of tank |
5 holes for air vent,water inlet and outlet, El. Heater and mag. rod |
| Fastening pieces |
Made of stainless steel screw |
| Absorbed area |
1.875 m² |
| Tube quantity |
58x1,800mmx18tube with heat pipe |
| Tank capacity |
180L |
Detailed Photos
Audited Supplier 
){kind=link}